-

miércoles, 26 de abril de 2017

Uso del Forward Assist en M4 ICS

--- Pendiente de traducir. ---

Positions of the piston and gear after GEAR BOX operation

Semi-auto mode:
The electric current break timing is similiar when it is semi-auto. Because of inertia and the spring rebound, the piston usually stops at these two positions after shooting. Please refer to the photos below. (The different strength, length of spring and the power of battery also result in differnt piston positions.)



Full automatic:

When shooting automatically, the time gap between each triggering is different and the electric current break timing is different too. Besides, inertia and the rebound of sprng result in four possible stop positions of the piston and gear (The different strength, length of spring, and the power of battery also result in different piston positions.)




The timing of using forward assist:

1.Although AEGs is a toy gun, we still apply the norm of real gun. We have to unload airsoft gun first after shooting or combat.

2.When we don’t use the airsoft gun, we have to release the magazine and select semi-auto. Point the gun toward safety area and clean the pellets remaining in barrel by shooting two ~ three times. Then push the forward assist knob to release piston and spring.

3.Pushing the forward assist knob when the fire mode is still in auto may cause the broken piston. As it mention above that there are four possible stop points of the piston after automatic shooting. If the piston happens to be at the forth position and players push the forward assist knob, No.3 gear will reverse too fast because of the inertia and rebound which result from spring tension. The reversing No.3 gear will hit the last teeth of piston and may break it. This situation gets worse with more powerful spring setting.

4.The proper way to use forward assist are first, release the magazine, Second, Point the gun toward nobody and clean the pellets remaining in barrel by shooting two ~ three times. Finally push the forward assist knob to release piston and disassembly battery plug. Then store your airsoft gun into carrying bag. Forward assist knob is not for using at any moment. The proper timing of using forward assist knob is after shooting or combat and all the unloaded processes are done.

No hay comentarios:

Publicar un comentario

TU MENSAJE NO SERÁ VISIBLE HASTA SER APROBADO POR UN MODERADOR.
Si vas a hacer alguna consulta que no sea acerca del propio artículo mejor remítela a estas direcciones:

Consultas generales: info@airsoft.es

Consultas técnicas: taller@airsoft.es

-